Q: I had my hardwood sanded and refinished and high-gloss put on. It had little round spots all over it that the polyurethane did not cover. So I had it buffed and recoated with the polyurethane and still the spots are popping up everywhere, where the polyurethane did not stick. They tell me that there’s nothing they can do for this. What is causing this?
A: There has got to be a contaminant which is repelling the finish in those spots. Poloplaz has a strong cleaner which can remove contaminants. It is called Tie Tac and I’ve used this on more than one job. Using it rescued the floor. www.poloplaz.com
Related Questions
Grey spots in finishI took on the project of refinishing my red oak hardwood floors and I’ve came to a standstill. I rented a belt sander and vibrating sander to sand the floors down. After this, I applied an oil-based stain and let it dry for a couple of days. The next step…
Orange spots and water borne finishQ: I put down water base on an oak floor. It turned orange near the cabinets and near a spot where I re sanded a dent from the fridge (a 1x1 square). Will the orange spots go away after the final coat? Or is it doing this because I hand…
White cloudiness to polyurethane finishQ: After refinishing a hardwood floor hallway with coats of polyurethane, there is a white cloudiness on some parts of the floor that will not wipe away or go away. What can I use on it or how can I repair it? A: Was this a waterborne polyurethane? It sounds…
Dust spots in the finishQ: Some shoddy workmen applied high gloss polyurethane to my sanded oak (80 years old, at least) LR and DR floors, without clearing the dust from the rooms! The next workman, trying to correct this, sanded with a fine grade grit (120?). While the floor FEELS SMOOTH, you can still…
A few bare spots in old finishWe own a 116 year old Victorian home and our large dining room area has an original pine wood floor. Since we have lived here for only two years, we have never refinished this floor. The problem is that lately, in quite a few spots, the finish has peeled and…
Black spots appearing after refinishingQ: I just had my oak engineered floors refinished by professionals. Everything looked great. Days after black spots started appearing in one room. The spots are getting bigger and more are appearing each day. This room is on a second floor, so no water problem. A: I can only make…