Q: I had to use some flea bombs in my house because of a flea problem we were having. They seem to have taken some of the finish off our floors in places, and we are now left with many dull spots. What can I bring the shine back with?
A: I would clean the floors really well first with an approved polyurethane cleaner made by one of the following companies. That should remove any chemical residue. If the finish is damaged, the floors may have to be buffed and re coated. www.poloplaz.com www.bonakemi.com www.basiccoatings.com
Related Questions
Finish repelled in spotsQ: I had my hardwood sanded and refinished and high-gloss put on. It had little round spots all over it that the polyurethane did not cover. So I had it buffed and recoated with the polyurethane and still the spots are popping up everywhere, where the polyurethane did not stick.…
Stepped on finish before it was dry and left a dull footprintQ: We just had our oak floors sanded and re-finished. The guy did a great job. Today in the morning he put the last glossy/shiny finish - looks wonderful. We came home after 7PM and I tried to get to the bathroom. The floor looked to me like it was…
Grey spots in finishI took on the project of refinishing my red oak hardwood floors and I’ve came to a standstill. I rented a belt sander and vibrating sander to sand the floors down. After this, I applied an oil-based stain and let it dry for a couple of days. The next step…
Orange spots and water borne finishQ: I put down water base on an oak floor. It turned orange near the cabinets and near a spot where I re sanded a dent from the fridge (a 1x1 square). Will the orange spots go away after the final coat? Or is it doing this because I hand…
A few bare spots in old finishWe own a 116 year old Victorian home and our large dining room area has an original pine wood floor. Since we have lived here for only two years, we have never refinished this floor. The problem is that lately, in quite a few spots, the finish has peeled and…