How do you fills gaps in laminate floor?

by

Q: How do you fills gaps in laminate floor? There are gaps between the boards in my laminated floors.

A: There really should not be any gaps between laminate if it is a decent product to begin with. There are all sorts of wood filler on the market to choose from. It probably won’t look great. But you can fill gaps in laminate flooring with them. If there are not many gaps, consider a tube filler product such as Color Rite. www.colorriteinc.com

Related Questions

  • Filling cracks in wood floor

    I have a hard maple wood floor that's 80 years old. The boards are 1 1/2" wide and have shrunk from 1/32" to 1/4" inch. Is their a way to fill the cracks? Will it look natural when finished?

  • Gaps in laminate flooring

    I purchased a home a year ago that had laminate flooring in the living room. Everything was fine, until 1/8 inch gaps appeared suddenly at the ends of about 10 planks near the center of the floor. The gaps didn't form along the grooved, long side of the plank, but…

  • Dull laminate floor

    How do I get my laminated wood floor to look like new? After moving in, and Christmas with the grandkids, we have scruff marks all over the floor. The laminated floor has become dull.

  • Gap around perimeter of laminate floor

    I have some uneven gaps around the perimeter of my laminate flooring which I am installing myself. In some places, they are as big as 10 mm. Can I cover them with Quarter rounds? Also, about the underlayment, should the underlayment run under the baseboards or should it be just…

  • Laminate flooring pops and cracks

    Q: I recently put down P---- laminate flooring that has a backing on it, no underlayment, concrete floor is 20 years old. Now the floor pops and cracks. A: Possibly some expansion happening. Did you leave a gap around the perimeter? Was the concrete flat? You could place a hygrometer…

  • Laminate flooring and gaps around door

    I recently installed laminate flooring throughout my home. Upon completion of the project I realized that I had some gaps around my door frames. After some further investigation I realized that I should have used an undercut saw to take off the bottoms of the door frames so the floor…