Q: I have hardwood floors that I plan on redoing. I plan on sanding and doing all that needs to be done. My question is, right now I assume that the finish is oil, is it OK if I now use water base?
A: You can use water borne over an oil finish provided it is thoroughly dried.
Related Questions
Orange spots and water borne finishQ: I put down water base on an oak floor. It turned orange near the cabinets and near a spot where I re sanded a dent from the fridge (a 1x1 square). Will the orange spots go away after the final coat? Or is it doing this because I hand…
Water or oil based finishI am getting a lot of different opinions on which is a better method to refinish my wood floor, water or oil based finish?
Hardwax oil finishAre you familiar with O*** P**** oil? How does it compare to Waterlox? I really like the look and benefits (easily repairable) of a hardwax oil finish. It seems technology has made even this type of floor low maintenance.
Adding oil over water based finish?I recently had my oak floors refinished with water based poly. I would rather have had Oil but because of time constraints at that time I opted for the water. I want to put a couple of coats of oil on top. Can I just rough up the floor and…
Oil finish?I have just selected "*********" hardwood flooring for my new condo. The hardwood flooring company has suggested it be finished with an oil, rather than urethane. What are the pros and cons of each? Which would you recommend?
Water based finish buff/coat over oil based?I have a floor on which a customer put 3 oil based coats. The customer wants to know if I can buff and coat the floor with a water based finish. Is this okay to do? Will it dry right?