Q: I had an engineered floor glued down on a concrete slab eight months ago. I have noticed that the veneer on two boards is peeling.
Is this common, and how can it be repaired?
A: I would not say this is common. Those boards are defective. They will have to be removed and replaced.
Related Questions
Poly Flaking Off and White Between BoardsQ: We have an 18 yr old white oak floor that was recently refinished. There were some errors in the staining in a few areas and these were redone. Now some of the poly is flaking off in the cracks and also on the boards themselves. This are also noticeable…
Hardwood floor finish is peeling offWe have wood floors that were installed 5 or 6 years ago. I had them recently recoated and the coating is peeling off. The flooring company advised that cleaning products such as Murphy's Oil Soap (which I used on my floors) will penetrate the finished wood in scratches and deep…
Flaking polyurethane finishQ: We recently refinished the 1700 sq ft of red oak wood floors in our home. It had been a prefinished floor when initially installed, so it was a bear to sand down, but we got it done. We sanded them well, vacuumed and wiped them before applying stain. We…
Finish peels offI am looking at refinishing a oak hardwood floor that has had a product called gymnasium 401 on it. I am wondering how I remove it without damaging the stain under it? What would I use to refinish it after? There are a few spots where the finish has peeled…
Finish peeling right offMy hardwood floors were just cleaned and then three coats of finish/poly were added. The cleaning did not include any abrasion. I noticed prior to the cleaning that there were areas where the top most part of the oak wood has lifted, almost like it is peeling off. It looks…