Q: I am building a custom staircase, with 12″ Aluminum C-channel for stringers. I am looking for solid wood treads, around 2″ thick, by roughly 12″ wide, and 36″ long. Walnut, Oak, or light Cherry are valid wood options.
Can you please tell me if you have anything along these lines?
A: You might want to contact these people who take the raw materials and manufacture it to whatever specs you choose:
Currently we have carpeted stairs with open risers from our lower level to upper level. What is the best way to replace with hardwoods?
...How do I finish off the stairway where it meets the hardwood? Do I cut a bull nose or some type of custom wood? Also, How do I do curved stairs with hardwood planks? Do I have to taper each piece or just the last few?
Filling nail holes on staircase
The steps on my staircase are maple. I have already sanded them and I need to fill some holes and polyurethane them. What should I use?
Custom dark stain
We are building a house and we're trying to find a dark stain that will compliment our modern interior. We most likely will have a 4" or 5" Oak plank or a Walnut. I looked at the Ebony stain, but it seems to have a green tint. We also mixed…
Staircase with gouges and gaps
Q: Firstly, thank you so much for such an informative website. I've learned more in the last 20 minutes here than the rest of the 3 hours of research combined! I have a question about staircase gaps and gouges. I own a home in the Chicagoland area, built in 1926.…