Adhesive for cork on cementboard

by

Q: I am going to put 1/4″ ground cork underlayment down on a “***********” cementboard covered floor. What is my best option to use as an adhesive?

A: I would probably use a Bostik urethane adhesive. If you are using a glue down floor on top of the cork it would be wise to use the same adhesive for both.

Related Questions

  • Cork and glue or plywood and nail subfloor

    Is it more expensive to do the cork and glued-down method or the plywood and nailed-down method? (a concrete sub floor)

  • Bostik adhesive

    Our installer did not clean the glue up off his knee pads/shoes as he installed. We have tried mineral spirits, lighter fluid. Any other ideas. It was a Bostik adhesive?

  • Removing glue residue from hardwood floor

    How can I safely remove glue residue from my newly installed hardwood floor?

  • Cork binder

    I'm refinishing my son's room and am wondering about cork. With multiple allergies, I'm concerned about the binder (is it a gluten based binder?) and the finish.

  • Removing floor laid with rubberized adhesive

    I had a flood and the engineered wood floor which was laid with rubberized adhesive must come up. It is glued on a concrete slab. What is the best way to remove the floor?

  • Removing glue from wood floor

    I recently had hardwood floors ( oak ) installed. During the installation one of the workmen had some glue stuck to his boot and left glue spots in 5 or 6 areas of the floor. The glue is in spots and is not thick but is noticeable. Is there any…