Q: We are in the process of putting oak wood floors in our cabin. The grade wood we chose is full of knot holes. We love the look. Our question is how do we fill the knots prior to finishing?
What is the best method?
A: Perhaps the place you bought this flooring also sells water based or latex filler in small tubs. Apply with putty knife and when dry, sand off.
Related Questions
Filling knotsI'm putting in a hickory floor that has lots of knots. I like the rustic look, but I also want to fill the knots. I was thinking epoxy. What about a trowel on filler? Hickory has such a wild variation in light & dark wood, I'm not sure what color…
Filling knot holes and flaws before finishingWe are installing utility grade oak hardwood flooring. We like the look of the large knot holes and other flaws in the wood. My questions is how to fill these holes before finishing? We are planning on finishing with a water based polyurethane (no Stain). I was wondering if there…
Finishing basementWe are finishing our basement. It is cement and we are considering putting in a sub-floor, in-floor heating, and then installing cork flooring or tile. Which is the better option? We’re leaning towards the cork; however, will the cork flooring be durable enough in the event of a septic tank…
Finishing pine stair treadsI'm refinishing my pine stair treads in my late 1800's house. I have rough sanded and am getting ready for finish sanding. Should I use anything as a sanding sealer? Most importantly, what finish coat/product should I use? The treads are softwood so not sure urethane would be the way…
Can finishing be done room by room?Q: I have read all I can on floor finishing. The main floors are all hardwood. I have a question about finishing a floor room by room. Due to time restraints, I would like to know if finishing can be done room by room? Is it difficult to blend in…
Filling grooves from shrinkageQ: I have recently installed tongue and groove spruce floors. The boards shrunk a bit so there are grooves between most of the boards. I have applied a mixture of 1/2 stain 1/2 Waterlox to the wood but am wondering what you would suggest to use as a final coating…