Q: We used a sander after we installed our brand new hard wood floor. After the stain was applied and dried, it now shows a circular marker from the sander.
Now that the stain is on and 2 coats of the water based finish, is there any way to fix the marks so they won’t show?
A: I would suggest hiring a professional to do the job over. I understand peoples desire to do it themselves, but honestly, some jobs are not for the novice. Floor sanding, staining and finishing is one of those careers that really requires a period of apprenticeship.
Related Questions
Spot sanding water marks off waxed floorQ: Hi. I've attempted to spot sand some water marks off the floor. Have retreated the areas with same wax as rest of floor, but they appear darker now. Do you know what I've done wrong? A: If this is stained wood or tinted wax perhaps you used too coarse…
Hardwood floor sanded across the grainQ: Our contractor had one of his workers sand our hardwood floors across the grain. Now no matter what they do it shows lines or grooves across the floor. A: I have on occasion sanded on an angle, about 30 degrees to flatten a floor. I've never had any issue…
DIY Install of bamboo floorI am installing a bamboo floor that is 5/8" thick. I cannot find any place near me that rents an air powered flooring nailer (or shims to adjust a 3/8" or 3/4" ) to accommodate 5/8" thick flooring. How should I install it? Pre-drill and use a hammer and nail…
Pneumatic hardwood floor nailer leaving marksMy pneumatic hardwood floor nailer sometimes leaves unsightly marks my prefinished hardwood when I am nailing it. Is there something I should put over the plate on the nailer that will prevent it from marking the hardwood?
Big white spots on DIY stained floorWe sanded and stained and polyurethaned old wood floors. There were really dark spots from old stains on some parts of the floor. We sanded them as much as we could. After we stained the floor, and put on the polyurethane, we now have big white spots on some parts…
Circular marks on tableI just had an end table top refinished by a local guy who has been in business for 25 yrs. A lamp is on top and shows off the finish very clearly. Under this light, I can very clearly see circular motion from his buffer (he told me before he…