Dark rings on floor

by

Q: My boyfriend left a set of tires (don’t ask!) on his hardwood floor. There are now dark rings on the floor that will not come off with regular cleaning.

Do you have a suggestion on how to get rid of these marks?

A: Susan, these dark rings are likely water stains. Most likely, the area or entire floor will have to be sanded and refinished.

Related Questions

  • Dark grey floor stain

    We are looking at purchasing an engineered hardwood floor for our kitchen - maple / graphite dark grey. I was told by a someone that dark grey stains don't wear as well as they don't penetrate as deep as other "lighter" stains. Is this true?

  • Gouge in hardwood floor

    I lifted up the doormat to vacuum clean any dust and grit underneath to find a three inch damage, looks like someone's heels have been dragged across it and took a shaving off the solid oak floor, we are not sure if it was there already or our fault, but…

  • Nicks and scratches

    We have pre-finished floors and they told us that the floors would never need to be (and couldn't be) sanded and refinished. The floors are only about 6 months old but we have a few spots where things have been dropped and small nicks and chinks and scratches have been…

  • TSP spill left dark spots on floor

    Q: I spilled TSP on my hardwood floor. I thought I had cleaned it thoroughly, however, there are now dark spots in areas that I missed. Is there anyway for me to remove these stains without calling a professional? I believe the floor is oak. A: Sounds like a water…

  • Scratches on one floor, wax on another

    I have 2 questions. 1st) The hardwood floors in my home are 37 years old. The downstairs have been sanded and refinished with 3 coats of poly urethane. They are now starting to show some scratches. How do I remedy? 2nd) The upstairs have never had anything done to them,…

  • Dark stain circles on very old floor

    I just moved to an old house from the 1800's. The wooden floor is very old and has very dark stain circles on it. I have tried getting it off with soap and water. It wont come off. I was told I can't sand it because it is too thin.…